設備功能

處理器

Xilinx Kintex7 XC7K160T

板載內存

1 GByte DDR3-RAM

I/O模塊接口（信號觸發和同步）

onboard: 8in/8out (max.), TTL or opto-coupled, Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (depends on configuration), 2 TTL outputs

通過接口供電（每個端口）

PoCXP (13W/24V per cable, Safe Power)

相機接口

標準

CoaXPress 1.0/1.1

接口

CXP-6

配置

CXP1-6; up to 4 cameras

接頭

4 x DIN 1.0/2.3

功率輸出

SafePower, Power over CXP 13W/24V per cable

相機支持

area scan camera, line scan camera

芯片類型

CFA sensor (Bayer), RGB sensor, Grayscale sensor

芯片分辨率

65k (line scan sensors), 8k (-65k)*65k (area scan sensor, depends on applet)

位深

8-16-bit (grayscale), 24-48-bit (color)

數據帶寬

4 x 6,25 Gbit/s

數據帶寬（每個端口；總計）

6,25 Gbps; 25 Gbps

端口數

4

測試環境

Camera Simulator

主機PC接口

PC總線接口

PCIe 2.1 x4, DMA1800

PC總線接口性能

up to 1.800 MB/s (sustainable)

控件和通用I/O

觸發板GPIO接口

Box connector (34-pin)

板載GPIO接口

One 34-pin flat cable connector onboard: 8 input signals and 8 output signals with open-drain optionally as 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422); 4 opto-coupled outputs (4,5V - 28V)

板載前端GPIO接口

2 TTL outputs, up to 20 MHz frequency, One 15-pin D-Sub socket: 2 opto-coupled differential inputs (RS422) and 1 opto-coupled differential / single ended input

GPIO同步和控制

Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization

GPIO接口概述

onboard: 8in/8out (max.), TTL or opto-coupled, Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (configuration dependent), 2 TTL outputs

處理功能

基本功能

Mirroring, Image Selector, LUT, White Balance, Invert, ROI, Offset/Gain/Gamma correction

物理和環境信息

尺寸

PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height

重量（典型值）

158 g

功耗/電源

typ. 1.075 A @ 12V (actual values depend on image pre-processing), maximum load: 3.15 A (single supply over 4-pin power connector)

操作溫度

50° (0 LFM*), 60° (100 LFM*) FPGA operating temperature: 0°C to 85°C, *LFM = Linear Feet per Minute, unit for measuring airflow velocity.

存儲溫度

-50°C up to 80°C

相對濕度（操作、存儲）

5% - 90% non-condensing (operating), 0% - 95% (storage)

MTBF

pending

合規

CE class B, WEEE, RoHS, REACH

軟件

軟件驅動程序

Linux 64-Bit, Windows 11 / 10 (64-Bit), Windows 11 / 10 (32-Bit)

軟件工具

microDisplay (Acquisition control and viewer), GenICam Explorer (Camera configuration tool), microDiagnostics (Analysis and service tool), Device Drivers, SDK, Documentation

軟件API

Framegrabber SDK, .net interface

FPGA編程

not programmable

BV-軟件兼容性

Halcon, Cognex, Labview